What Is Product Genealogy?

What Is Product Genealogy?

Product genealogy is a traceability record that shows, in a multi-level tree structure, which semi-finished and raw material lots a finished product or lot was made from, through which operations and machines, and in what quantities. It is the visual and structural counterpart of lot traceability.

In Short
  • Root: finished product lot; branches: semi-finished lots; leaves: raw material / supplier lots.
  • At every node: lot number, quantity, operation, machine, operator, time.
  • The BOM is what "should be"; genealogy is what "is".
  • Used by: quality, production engineering and teams handling customer audits.
  • Benefit: seeing the root cause at a glance in multi-stage production.

What Does Genealogy Show?

In single-stage production, lot traceability can be described with one table row: input lot, output lot. In most plants, however, the product passes through several stages and more than one input is used at each stage. The relationship then becomes a tree:

  • Finished product lot L-1001
    • Semi-finished lot Y-540 (insulated core), 380 kg
      • Copper wire lot T-77, 250 kg — supplier lot S-2024-118
      • PVC granule lot G-31, 130 kg — supplier lot P-8812
    • Sheath granule lot G-32, 90 kg

Each node carries information on the operation (wire drawing, insulation, sheathing), machine, operator and time. This structure lets you move up from any node (which products did it go into) or down (which inputs did it come from).

Why Does It Matter?

The source of a quality problem is often not the last operation. For example, a defect on the sheath surface may originate from conductor stranding two stages earlier. Without genealogy this link can only be guessed from experience; with genealogy you can see concretely which intermediate lot was produced on which machine.

The second reason is supplier-related incidents. Starting from a raw material lot's position in the genealogy, all semi-finished products it went into, and from there all finished products, are listed; this is forward traceability performed over the tree.

How Is Genealogy Built?

Genealogy is not data entered separately; it is a natural outcome of production records. When three things are recorded at every operation, the tree forms by itself:

  1. Which input lots were consumed (and how much)?
  2. Which output lot was produced (and how much)?
  3. Who performed the operation, on which machine, and when?

If input consumption is recorded by scanning barcodes/DataMatrix codes and the output lot with a system-generated label, the need for manual entry disappears.

BOM vs. Genealogy

BOM (Bill of Materials)Genealogy
NaturePlanned structureActual structure
ContentMaterial code, standard quantityLot number, actual quantity, machine, operator, time
TimingDefined before productionCreated during production
UsePlanning, costing, MRPTraceability, quality, recalls

Comparing the BOM with the genealogy reveals deviations from standard consumption and unplanned material substitutions.

Common Mistakes

  • Skipping the intermediate level: When semi-finished lots are not numbered, the tree collapses to two levels and you cannot see which intermediate operation caused the problem.
  • Records without quantities: The information "this lot was used" exists, but "how much" does not; with partial consumption the scope becomes unclear.
  • No rework record: If a reworked lot is not added as a new node, its history is lost.

Frequently Asked Questions

Is product genealogy the same as a BOM?
No. The BOM is the planned structure that defines how the product should be made; genealogy is the actual record showing which lots were really used and in what quantities. The BOM is design data, genealogy is production data. Comparing the two reveals deviations.
Why is quantity information important in genealogy?
Only part of an input lot, rather than all of it, may have gone into a particular product. Quantity information shows how much of the problematic input each output lot contains and helps define the recall scope more precisely.
How many levels deep does genealogy go?
As many as there are production stages. For example, in a cable the chain sheath → insulation → conductor → copper rod makes four levels. As long as the system records the input-output link at every level, there is no depth limit.

Product Genealogy in EFFIX MES

EFFIX MES records the input lots consumed and the output lot produced at every operation, together with their quantities; product genealogy is generated automatically from these records as a multi-level tree view. You can query forward or backward from any node in the tree, and related quality results and NCR records open from the same screen. Comparison with BOM and routing definitions makes the difference between planned and actual consumption visible. For details, visit the EFFIX MES page or submit a presentation/demo request.