Blog
Guides and industry articles on digital transformation, MES, energy management, quality, and data engineering.

How to Design a Production Dashboard?
How to design a production dashboard? Choosing indicators by audience, design rules, use of colour, refresh rates and common mistakes, explained step by step.
3 min read
What Is TSRS (Turkish Sustainability Reporting Standards)?
What is TSRS? What TSRS 1 and TSRS 2 require, the impact on production sites, Scope 1-2-3 emissions data, steps for getting ready and common mistakes.
3 min read
What Is Anomaly Detection in Manufacturing?
What is anomaly detection in manufacturing? Why fixed thresholds fall short, common methods, use cases, reducing false alarms and how to get started.
3 min read
What Is Production Scheduling?
What is production scheduling? What it solves, common priority rules, constraints that make it harder, how often to update it and common mistakes.
3 min read
AI Assistants and Chatbots in Manufacturing
What do AI assistants and chatbots do in manufacturing? Suitable question types, three conditions for a correct setup, common mistakes and reliable use.
3 min read
What Is Throughput?
What is throughput in manufacturing? Its link to the bottleneck, Little's Law, how to measure it, a line example, how to increase it and common mistakes.
3 min read
What Is TEEP? How It Differs from OEE
What is TEEP and how does it differ from OEE? Calculating TEEP with utilization, a worked example, OEE vs TEEP comparison and common mistakes.
3 min read
What Is Takt Time?
What is takt time and how is it calculated? Formula and example, the difference from cycle time, use in line balancing, common mistakes and when to update it.
3 min read
Finite and Infinite Capacity Planning
What are finite and infinite capacity planning? How each works, MRP vs APS, a comparison table, when to use which, and what to watch when making the transition.
3 min read
What Is SMED? How Can Setup Time Be Reduced?
SMED is the lean method that aims to cut machine setup time to single-digit minutes. Internal vs external setup, the steps and how to measure it.
3 min read
What Is SPC (Statistical Process Control)?
What is SPC (statistical process control)? Control charts, common and special cause variation, steps to apply it, common mistakes and a shop-floor example.
4 min read
What Is CBAM? How Does It Affect Manufacturers?
CBAM is the EU border carbon mechanism that puts a price on the embedded carbon emissions of products imported into the EU. Scope, timeline and how to prepare.
4 min read
What Is Flexible Reporting and Self-Service BI?
Self-service BI lets users build their own reports without waiting for a technical team. Conditions for flexible reporting, governance and use in production.
3 min readProduction Tracking with Sensor and Counter Data
Production tracking with counter data turns cycle and part pulses into quantity, speed and OEE per work order. Counter types, multipliers and mistakes.
3 min read
What Is Order Due Dating (Order Promising)?
Order due dating calculates when an order can be delivered based on capacity and material status. Its methods and common mistakes.
3 min read
What Is FPY (First Pass Yield)?
FPY (First Pass Yield) is the share of products made right the first time. Its formula, its relationship with RTY and a worked example, step by step.
3 min read
What Is Gemba?
Gemba is the lean concept meaning the place where work is actually done. The purpose and steps of a Gemba walk, questions to ask and backing it with data.
3 min read
Production Planning with Gantt Charts
A Gantt chart shows jobs as bars on a timeline. How it is used in production planning and what to watch for, explained with examples.
3 min read
What Is Recall Management?
Recall management is determining the scope of defective products in the field and retrieving them. Narrowing scope with traceability and process steps.
3 min read
Visual Management and Production Boards
Visual management shows production status, targets and deviations so they are understood at a glance. Board types, content rules and digital boards.
3 min read
How Is MES Used in Food Manufacturing?
In food manufacturing, MES supports batch traceability, recipe management, hygiene and checklist records, expiry dates and recalls.
3 min read
What Is an HMI? What Does an Operator Panel Do?
An HMI (Human-Machine Interface) is the screen where the operator monitors and controls a machine. Machine HMI vs MES terminal and design principles.
3 min read
What Are the GRI Standards?
The GRI Standards are the global framework organisations use to report their economic, environmental and social impacts. Structure and impact on production.
3 min read
What Is Hoshin Kanri?
Hoshin Kanri is a Japanese planning method that cascades company strategy into annual goals and shop-floor KPIs. The X-matrix and catchball cycle.
3 min read
What Is IEC 62443?
IEC 62443 is the cybersecurity standard for industrial automation and control systems. The zone/conduit approach, security levels and implementation steps.
3 min read
IATF 16949 and Traceability
IATF 16949 is the automotive quality standard adding requirements to ISO 9001. How traceability, SPC, MSA and the control plan are met with an MES.
3 min read
What Is Forward and Backward Traceability?
Forward traceability shows which products a lot went into; backward traceability shows which inputs a product was made from. The difference and use.
3 min read
What Is IIoT (Industrial Internet of Things)?
IIoT is machines, sensors and devices in a factory sharing data over a network. Its components, how it differs from IoT and steps to apply it.
3 min read
What Is Work Order Management?
A work order is an instruction to produce a given quantity of a product. The work order life cycle, the information it should hold and common mistakes.
3 min read
What Is the ISA-88 Standard?
ISA-88 defines batch production with recipe, equipment and procedural models. Core concepts, how it differs from ISA-95 and its MES counterpart.
3 min read
What Is the ISA-18.2 Alarm Management Standard?
ISA-18.2 defines the design, prioritisation and life cycle of industrial alarms. Principles that prevent alarm floods and how they apply in an MES.
3 min read
What Is the ISA-95 Standard? The Automation Pyramid
ISA-95 is the standard defining integration between ERP and production control systems. The automation pyramid, its five levels and where MES fits.
3 min read
ISO 9001 and MES
ISO 9001 requires traceability, calibration and record control in production. How an MES meets these requirements with automatic evidence, and what changes.
3 min read
What Is ISO 50001?
ISO 50001 is the energy management system standard that sets requirements for improving energy performance systematically. Structure and EnPIs.
3 min read
What Is Paperless Manufacturing?
Paperless manufacturing moves shop-floor forms, schedules and work instructions into digital form. Scope, benefits, transition steps and common mistakes.
3 min read
How Is MES Used in Cable Manufacturing?
How does MES handle metre-based production tracking, reel traceability, OEE on extrusion lines, scrap and energy monitoring in cable manufacturing?
3 min read
What Is Kaizen?
Kaizen is a Japanese management approach that improves processes through small, continuous improvements. The PDCA cycle, event steps and common mistakes.
3 min read
What Is a Quality Control Checklist?
What is a quality control checklist, how is it prepared and why go digital instead of paper? Question design, frequency and handling non-conforming answers.
3 min readWhat Is Mould and Tool Life Tracking?
What is mould and tool life tracking, why base it on production count and why do mount/unmount records matter? Planning mould maintenance step by step.
3 min read
What Is Capacity Planning?
Capacity planning is calculating whether available production resources can meet demand. Types, calculation method and common mistakes.
3 min read
What Is Kanban?
Kanban is a card-based pull system that triggers production and material flow by actual consumption. Types, calculating the number of cards and digital boards.
3 min read
What Is a Dark Factory (Lights-Out Manufacturing)?
A dark factory (lights-out manufacturing) is a fully automated plant that can run without human intervention. Prerequisites, limits and intermediate steps.
4 min read
What Is a Decision Support System in Manufacturing?
A decision support system processes production data and presents options and their effects to managers. How it differs from reporting, its components and uses.
3 min read
What Is Quarantine and Lot Blocking?
Lot blocking stops the use of a suspect batch through the system. How the quarantine process is set up and which rules it needs, with examples.
3 min read
What Is Predictive Maintenance?
Predictive maintenance detects deviations in equipment data before failure and intervenes in time. How it works, the data it needs and the steps.
3 min read
What Is FMEA?
What is FMEA, how do DFMEA and PFMEA differ, and how are RPN and Action Priority calculated? Step-by-step application and common mistakes.
3 min read
What Are Control Charts? X̄-R and I-MR
What is a control chart, which chart type is used when, how are control limits calculated and how are out-of-control signals read? Formulas and examples.
4 min read
Enterprise Authentication with LDAP / Active Directory
Enterprise authentication with LDAP and Active Directory lets users log in to systems with a single account. Its role in MES, benefits and setup steps.
3 min read
What Is a Control Plan?
What is a control plan, what columns does it have, how does it relate to FMEA and how is it prepared? Prototype, pre-launch and production plans explained.
3 min read
What Is Lot Traceability?
Lot traceability records which raw materials, machine, people and time a batch was produced with. Its benefits and the steps to implement it.
3 min read
What Is Lead Time?
Lead time is the total time from receiving an order to delivering it. Its components, how it differs from cycle time and ways to shorten it.
3 min read
What Is Machine Data Collection (MDC)?
MDC (Machine Data Collection) is a system that automatically collects machine status, count, alarm and process data. How it works, data types and benefits.
3 min read
What Is Master Data Management?
Master data management means managing core data such as products, machines and materials from a single, correct source. Scope, its role in MES and mistakes.
3 min readWhat Is Material Consumption Tracking?
Material consumption tracking records raw materials and semi-finished goods actually consumed per work order and lot. How to see variances and the steps.
3 min read
What Is the Difference Between MES and ERP?
MES executes production on the shop floor in real time; ERP plans orders, inventory and cost. Differences in scope, time scale and users, and why both matter.
3 min read
How Is MES–ERP Integration Done?
In MES-ERP integration, work orders and master data come from ERP, and production and scrap confirmations go back. Data objects, methods, steps and pitfalls.
3 min read
What Is the Difference Between MES and SCADA?
SCADA monitors and controls the machine on a scale of seconds; MES manages work orders, quality and OEE. How the two differ and how they work together.
3 min read
How Is an MES Project Implemented? Steps and Timeline
An MES project consists of scoping, master data, data collection, pilot, roll-out and go-live steps. The phase plan, expected timeline and common mistakes.
4 min read
What Is MES (Manufacturing Execution System)?
MES (Manufacturing Execution System) is software that executes work orders on the shop floor and collects machine data in real time. Functions and ERP link.
4 min read
How Is the ROI of an MES Investment Calculated?
MES ROI is calculated by comparing capacity, scrap, inventory and labour items against measured baselines. The formula and the gain items.
3 min read
What to Look for When Choosing an MES
Functional scope, machine connectivity, ERP integration, flexibility and vendor support decide MES selection. A step-by-step evaluation checklist.
4 min read
Backup and Disaster Recovery for MES
MES backup and disaster recovery: RPO/RTO targets, backup types and restore drills. How to protect production data without stopping production.
3 min read
What Is a Micro Stop?
Micro stops are short machine stops lasting from seconds to a few minutes. Why they stay hidden, how to measure them automatically and their effect on OEE.
4 min read
MES in Metalworking and Machining
MES in machining makes shop capacity visible with CNC data collection, setup time measurement, tool life, work order tracking and quality records.
3 min read
What Is Modbus?
Modbus is a widespread industrial protocol in which PLCs, drives and meters exchange register-based data. The RTU/TCP difference and register types.
3 min read
What Is Mobile MES?
Mobile MES means using the manufacturing execution system on phones and tablets. Typical scenarios, permissions and offline working are covered here.
3 min read
What Is MOM (Manufacturing Operations Management)?
MOM is the approach that manages production, quality, maintenance and inventory operations under one roof. Its difference from MES and its place in ISA-95.
3 min read
What Is MRP?
MRP is the method that calculates which material is needed, when and how much, from the bill of materials and stock data. Its logic, inputs and common errors.
3 min read
What Is MQTT? How Is It Used in Factories?
MQTT is a lightweight messaging protocol based on the publish-subscribe model. Its use and advantages in carrying data between sensors, PLCs and MES.
3 min read
What Is MTConnect?
MTConnect is an open standard for getting data from machine tools. How it works, how it differs from OPC UA and how it is used in MES.
3 min read
What Is MTBF? How Is It Calculated?
MTBF is the average operating time between two failures. Its formula, how it differs from MTTR and MTTF, a sample calculation and common measurement errors.
3 min read
What Is MTTR? How Is It Calculated?
MTTR (Mean Time To Repair) is the average repair time from failure to running again. The formula, which times are included, the MTBF link and an example.
4 min read
What Is MTTF?
MTTF is the average operating time of a non-repairable part until its first failure. Its formula, how it differs from MTBF and where it is used.
3 min read
What Is 3D Factory Visualization?
3D factory visualization shows the plant layout as a 3D model and mirrors machine states live. Benefits, data requirements and setup steps.
3 min read
What Is an NCR (Non-Conformance Report)?
What an NCR (non-conformance report) is, which fields it contains and the disposition options. The non-conformance process and digital NCR, step by step.
3 min read
What Is 5S?
5S is a five-step lean method that makes the workplace orderly, clean and standardised: Seiri, Seiton, Seiso, Seiketsu, Shitsuke and digital audits.
3 min read
What Is 8D Problem Solving?
What is 8D problem solving, what are the D0-D8 steps and when is it used? How to prepare an 8D report for customer complaints, explained with an example.
3 min read
What Are the 7 Wastes (Muda)?
The 7 wastes (Muda) are seven non-value-adding losses: overproduction, waiting, transport, overprocessing, inventory, motion, defects. Detection and examples.
3 min read
What Are the Six Big Losses?
The Six Big Losses classify what lowers OEE: breakdowns, setup, minor stops, reduced speed, scrap and startup losses. Examples and ways to reduce them.
4 min read
What Is a Smart Factory?
A smart factory connects machines and systems, collects data in real time and supports decisions automatically. Key features and steps to build one.
3 min read
How Is MES Used in Packaging Manufacturing?
How does MES cover reel-based tracking, setup time, scrap and OEE measurement on printing and cutting lines, and customer-level traceability in packaging?
3 min read
What Is APS (Advanced Planning and Scheduling)?
APS produces a feasible production schedule that respects finite capacity and constraints. How it differs from ERP/MRP, setup requirements and common mistakes.
3 min read
What Is Andon?
Andon is a lean system that instantly makes line problems visible with lights, sound or boards and calls for help. Types, flow, benefits and digital Andon.
3 min read
What Is Work-in-Process (WIP) Management?
WIP is semi-finished goods in production but not yet finished. WIP management tracks quantity, location and lot to control flow and tied-up cash.
3 min read
Unit Conversion and Quantity Management in Manufacturing
Unit conversion is translating the same material consistently between units such as metres, kilograms and pieces. Setup logic and common mistakes explained.
3 min read
Traceability with Barcode, QR and DataMatrix
Barcode, QR and DataMatrix codes carry traceability in production. Differences between code types, where each is used and rules for correct labelling.
3 min read
Cloud MES or On-Premise MES?
Cloud vs on-premise MES: a comparison of latency, data residency, cost model and continuity, plus the criteria for making the decision.
3 min read
What Is a BOM (Bill of Materials)?
A BOM lists the materials, semi-finished goods and quantities needed to make a product in a hierarchy. Types, structure and common mistakes.
3 min read
What Is CAPA (Corrective and Preventive Action)?
What is CAPA, how do corrective and preventive action differ and how is the process run? Effectiveness verification and common audit findings explained.
3 min read
What Is OEE? How Is It Calculated?
OEE (Overall Equipment Effectiveness) shows in one percentage how productively a machine runs in planned time. Formula, sample calculation, common mistakes.
3 min read
The Three Components of OEE: Availability, Performance, Quality
OEE's availability, performance and quality components show whether loss comes from stops, speed or defects. Their formulas and worked examples.
3 min read
What Is Preventive Maintenance?
Preventive maintenance is planned maintenance done by calendar or running hours before a failure occurs. How to set up the plan and how to measure it.
3 min read
What Is Measuring Instrument Calibration?
What measuring instrument calibration is, how the interval is set and how traceability is ensured. Calibration tracking and retroactive impact analysis.
3 min read
What Is OOE?
OOE (Overall Operations Effectiveness) calculates OEE over operating time, counting planned stops as well. Its formula, use cases and relationship with TEEP.
3 min read
What Is an Operator Skills Matrix?
An operator skills matrix is a table showing which staff member has which competence on which machine. Levels, set-up steps and uses.
3 min read
What Is OPC UA?
OPC UA is the standard that lets PLCs, machines and software from different brands exchange data securely and independently of platform. Structure and use.
3 min read
What Is an Operator Terminal (Kiosk)?
An operator terminal is the touchscreen MES station where production, downtime and quality records are entered. Its tasks, hardware and screen design rules.
3 min read
How Is Operator Performance Measured?
Measuring operator performance requires separating personal loss from system loss. The indicators to use and the ethical limits, with examples.
3 min read
What Is OT Security?
OT security protects operational technology on the production line such as PLCs, SCADA and MES. How it differs from IT, typical risks and key measures.
3 min read
What Is Autonomous Maintenance?
What autonomous maintenance (Jishu Hozen) is, its seven steps and the tasks operators take on. Its place in TPM and how to apply it with digital checklists.
3 min read
What Is Automatic Labelling in Production?
Automatic labelling means printing product, lot or packaging labels with the correct information at the moment of production. Barcode/DataMatrix traceability.
3 min read
How Is MES Used in Plastic Injection Moulding?
MES in plastic injection moulding covers machine connection via Euromap 63/77, cavity-based production tracking, mould life, cycle time and scrap control.
3 min read
The Difference Between Planned and Unplanned Downtime
Planned downtime is scheduled; unplanned downtime is an unexpected machine stop. Their effect on OEE, a comparison table and common mistakes.
4 min read
How Is Data Read from a PLC?
Reading data from a PLC means transferring status and counter values from controller memory to the MES via a protocol. Methods, steps and common mistakes.
3 min read
What Is a Proactive Alert System in Production?
A proactive alert system continuously monitors production data and reports deviations before they occur or grow. Detectors, ISA-18.2 principles and set-up.
3 min read
What Is Poka-Yoke?
What Poka-Yoke (mistake-proofing) is, its types and how it is applied in a factory. Explained with physical and software poka-yoke examples.
3 min read
What Is a Routing (BOP)?
A routing (bill of process, BOP) defines which operations a product goes through, in which order and on which machines. Its structure and link to the BOM.
3 min read
What Is Recipe Management?
Recipe management is the versioning and control of recipes that define which components, in which ratios and with which parameters a product is made.
3 min read
What Is Cycle Time?
Cycle time is the time a machine takes to produce one unit. Ideal vs actual cycle time, how it differs from takt time and its role in OEE.
3 min read
What Is Shop Floor Data Collection?
Shop floor data collection is the automatic or manual transfer of machine, operator and counter data into a system. Methods, common mistakes and benefits.
4 min read
What Is a CMMS?
What is a CMMS, which modules does it have and how does it differ from MES and EAM? Selection criteria and common implementation mistakes explained.
3 min read
What Is a Multi-Site MES Deployment?
A multi-site MES deployment manages several factories in one system. Architecture options, shared definitions and what to watch in reporting.
3 min read
What Is a CoA (Certificate of Analysis)?
What is a CoA, what does it contain and how is it generated automatically? Its link to lot data and the e-signed CoA process explained.
3 min read
What Are Cp and Cpk? Process Capability
What are Cp and Cpk, how is process capability calculated and what does the 1.33 threshold mean? Formula, Pp/Ppk difference and a worked example.
4 min read
What Is Value Stream Mapping (VSM)?
Value stream mapping (VSM) reveals waste by visualising material and information flow from raw material to delivery. Steps, symbols and an example.
3 min read
What Is Bottleneck Analysis? Theory of Constraints
A bottleneck is the most constrained resource that sets the pace of flow. How to find it and the five steps of the Theory of Constraints, with examples.
3 min read
What Are Digital Work Instructions?
Digital work instructions show operation steps on screen in their current version. Risks of paper instructions, version control and implementation steps.
3 min read
What Is a Digital Twin?
A digital twin is a virtual model of a physical machine, line or factory continuously updated with real data. Types, uses in manufacturing and steps.
3 min read
What Are the Digital Maturity Levels in Manufacturing?
Digital maturity levels describe, step by step, a factory's ability to collect and use data. The levels, their indicators and the path to progress.
3 min read
What Is Downtime Analysis?
Downtime analysis classifies the time a machine does not produce by reason. Find the biggest losses with Pareto and raise your OEE.
4 min read
What Is World-Class OEE?
World-class OEE is commonly accepted as 85%: 90% availability, 95% performance, 99% quality. Where the target comes from and how to read it by sector.
3 min read
What Is Edge Computing?
Edge computing is processing data where it is generated. How edge computing works in a factory, how it differs from the cloud and what it adds to MES.
3 min read
How to Code Downtime Reasons
Downtime reason coding classifies stops by a standard, hierarchical reason list. Code tree design, an example list and common mistakes.
4 min read
Electronic Signatures and Audit Trails in Manufacturing
An electronic signature is a digital approval proving who approved a record. How it is set up with an audit trail and what it is for, with examples.
3 min read
What Is Energy Monitoring?
Energy monitoring measures electricity, gas and compressed air use in a factory with meters and links it to production. Scope, benefits and steps.
4 min read
What Is Industry 4.0?
Industry 4.0 is self-regulating production where machines, products and systems share data. Definition, the 9 technologies and implementation steps.
4 min read
How to Digitise Old Machines (Retrofit)
Retrofit means collecting data by adding sensors, counters and IoT modules to old machines without communication. Methods, cost logic and steps.
3 min read
What Is ESG Reporting?
ESG reporting discloses a company's environmental, social and governance performance with measurable indicators. Frameworks, data and steps.
3 min read
What Are Euromap 63 and Euromap 77?
Euromap 63 and Euromap 77 are the standards for getting data from plastic injection moulding machines. The difference between them and MES integration.
3 min read
What Is FIFO? How Is It Applied in Manufacturing?
FIFO is the principle that the first material into stock is the first used. How it is applied in production, how it differs from FEFO and common mistakes.
3 min read
What Is Factory Digitalisation?
Factory digitalisation means production data is collected automatically from the shop floor and made visible in real time. Steps, benefits, common mistakes.
4 min read
What Is Scrap Rate? How Is It Calculated?
Scrap rate is the share of material that becomes unusable in production. Its formula, how it differs from rejects and ways to reduce it.
3 min read
What Is Shift Management and Shift Handover?
What are shift management and shift handover? A guide to splitting stops at shift boundaries, counter sync, common mistakes and accurate shift reports.
3 min read
How Is Shift Performance Measured?
How is shift performance measured? OEE and loss indicators, fair comparison conditions, shift boundary errors and what an end-of-shift report should contain.
3 min read
What Is Product Genealogy?
What is product genealogy? Lot-based multi-level traceability, how it differs from a BOM, how the genealogy tree is built, common mistakes and an example.
3 min read
What Is Production Reporting? Which Reports Do You Need?
What is production reporting? A guide to shift output, OEE, downtime Pareto and scrap reports, report design principles, breakdowns and why reports disagree.
3 min read
Production KPIs: Indicators to Track in a Factory
What are production KPIs? Efficiency, quality, maintenance and planning indicators like OEE, scrap rate, FPY, MTTR, MTBF and on-time delivery, used well.
3 min read
What Is AI in Manufacturing? Use Cases
What is AI in manufacturing? A guide to use cases such as failure prediction, anomaly detection and scheduling, the data quality prerequisite and first steps.
4 min read
Machine Learning in Manufacturing: Examples
Machine learning examples in manufacturing: failure and downtime prediction, scrap and quality prediction, cycle time and delivery forecasts, energy anomalies.
3 min read
How Is the Carbon Footprint Calculated in Manufacturing?
How do you calculate the carbon footprint in manufacturing? Scope 1-2-3 emissions, emission factor steps, product-level allocation and common mistakes.
4 min read
What Is Real-Time Visibility in Manufacturing?
What is real-time visibility in manufacturing? Visibility levels, the shop-floor data to collect, common mistakes and key principles for instant response.
3 min read
What Is Lean Manufacturing?
What is lean manufacturing? A complete guide to its five principles, seven wastes, tools such as 5S, Kanban and SMED, common mistakes and a shop-floor example.
3 min readNo posts in this category yet.
