Visual Management and Production Boards

Visual Management and Production Boards

Visual management is the method of showing the situation, targets, standards and deviations on the shop floor with visual tools (boards, lights, lines, labels, screens) so that everyone can understand them at a glance. Production boards are the most common application of this method; the goal is to take information out of people’s heads and make it visible on the shop floor in real time.

In brief

  • Principle: normal and abnormal, target and actual should be distinguishable at a glance.
  • Tools: floor lines, shadow boards, Andon lights, KPI boards, digital screens.
  • Board types: line/station board, shift board, management (KPI) board.
  • Rule: few indicators, large text, colour coding, up-to-date data.
  • Users: operator, team leader, shift supervisor, production manager.

What Is Visual Management?

Visual management is based on the lean principle of “make problems visible”. Anyone looking at a station should be able to answer three questions without reading a report: Is the situation normal right now? Where are we against the target? If there is a problem, who is doing what? Every tool that makes this possible falls under visual management: floor lines in 5S, Andon lights, Kanban cards and production boards.

Types of Production Board

BoardAudienceContentUpdate
Andon / line boardOperator, team leaderMachine status, target/actual count, active stopReal time
Shift boardShift supervisorShift OEE, downtime breakdown, scrap, handover notesEnd of shift
Management / KPI boardProduction and plant managementWeekly/monthly OEE, delivery performance, MTTR, energyDaily/weekly
Quality boardQuality teamFPY, number of NCRs, SPC deviationsDaily

Rules for a Good Board

  • Few but right indicators: 4-6 KPIs; each should be tied to a decision or behaviour.
  • Show it with the target: “1,240 pcs” on its own is meaningless; deviation from target should be shown with colour.
  • Readable from a distance: Text size and contrast are chosen according to the distance from which the board is expected to be seen.
  • Consistent colour coding: Green/yellow/red should mean the same thing on all boards.
  • Action area: Next to a red indicator there should be information on “what is being done, by whom, by when”.

Moving from Paper to Digital

Manually filled boards are enough to start visual management, but data is late and cannot be aggregated. When digital boards are fed from the MES, target/actual production, downtime and OEE update themselves during the shift, and the same data can be reported retrospectively. The most common mistake in the transition is moving the complex table from paper to the screen as-is; the simplicity rule applies to digital boards too.

Common Mistakes

  • A board that is not updated: An out-of-date board creates distrust and is ignored.
  • Indicator inflation: When every department adds its own KPI, the board turns into a report.
  • A board nobody discusses: If the board is not talked about in the start-of-shift meeting, it is just decoration.
  • Templates not specific to the plant: A copied board design may not show the local bottleneck.

Frequently Asked Questions

How many indicators should a production board have?
4-6 indicators are usually enough on a shop-floor board: target/actual production, OEE or availability, downtime, scrap and safety. More makes it harder to read from a distance. Detailed analysis should be done in reports, not on the board.
What is the difference between a paper board and a digital board?
A paper board is filled in by hand, data is late and the margin of error is high; but it is easy to set up. A digital board updates itself with MES data, shows the current situation even in the middle of a shift and allows retrospective analysis. Most plants use both for a while when moving to digital.
How often should boards be updated?
Shop-floor boards (Andon, target/actual) should be updated in real time or at least hourly. Shift and daily performance boards are refreshed at the end of the shift, management boards daily or weekly. A board that is not updated soon becomes invisible.

Visual Management and Production Boards in EFFIX MES

EFFIX MES automatically feeds Andon and factory boards with machine status, downtime and production data collected in real time from the shop floor; the boards are shown on large screens at line, area or plant level. Dashboard/KPI boards are tailored to the plant with the no-code report designer, and indicators such as OEE, scrap and MTTR are tracked colour-coded against targets. The 3D factory view offers management a different perspective by visualising machine states on the layout plan. To feed your boards with live data, see the EFFIX MES page or request a demo.