Traceability with Barcode, QR and DataMatrix

Traceability with Barcode, QR and DataMatrix

Barcode, QR and DataMatrix are marking methods that give objects in production such as products, lots, work orders, pallets or reels a unique identity and ensure that this identity is read without error on the shop floor. The basis of traceability is identifying every object with a single ID and linking it to system records by scanning it at every operation.

In brief

  • Barcode (1D): one-dimensional, limited characters; common in stock and shelf applications.
  • QR (2D): high data capacity, easy to read with mobile devices.
  • DataMatrix (2D): can be printed in small areas and is damage-resistant; preferred for part marking.
  • Principle: the code carries the ID; the details stay in the system.
  • Benefits: no manual data entry errors, complete lot links, fast backward tracing.

Comparison of Code Types

FeatureBarcode (1D)QRDataMatrix
DimensionOne-dimensionalTwo-dimensionalTwo-dimensional
Data capacityLowHighMedium-high
Space requiredWide and longMediumCan be very small
Damage resistanceLowHighHigh
Typical useShelves, boxes, stockDocuments, mobile accessParts, moulds, small labels

How Is the Traceability Chain Built?

  1. Decide which objects get an ID. Raw material lots, intermediate carriers (reels, spools, crates), finished products, pallets, moulds and measuring instruments.
  2. Define the ID rule. What a code represents must be unambiguous; the same number must not be used on two different objects.
  3. Define scan points. Scanning should happen at the entry and exit of every operation; a step without a scan leaves a gap in the chain.
  4. Print labels from the system. Handwritten labels or labels printed from a separate program create unrecorded IDs.
  5. Set up validation. When the wrong lot is scanned, the system should warn or stop the transaction; otherwise the code is just a fast typing tool.

Practical Labelling Rules

  • Consider the reading environment. Oil, dust, humidity, temperature and reflection determine the label material and printer choice.
  • Leave contrast and a quiet zone. If there is not enough space around the code, reading fails.
  • Print human-readable information next to the code. Production must not stop when a scanner fails.
  • Control reprints. If a label can be reprinted, the reason and who printed it should be recorded; otherwise the same ID can circulate on two objects.
  • Check the standards. In automotive, food and medical products, customer or industry standards may define the code content.

Common Mistakes

  • Embedding all data in the code: When information changes, the label becomes invalid; writing the ID and keeping details in the system is more robust.
  • Not making scanning mandatory: Optional scanning leaves holes in the chain and backward tracing breaks.
  • Printing the label at the last step: If intermediate products have no ID, links between operations cannot be made.
  • Choosing the code type out of habit: A 1D barcode that cannot be printed on a small part turns into handwriting on the shop floor.

Frequently Asked Questions

What is the difference between a barcode, QR and DataMatrix?
A barcode is one-dimensional and carries a limited number of characters. QR and DataMatrix are two-dimensional; they store more data and can be read even when partially damaged. DataMatrix is common in part marking because it can be printed in small areas.
Which code type suits which product?
DataMatrix is suitable when space is tight and permanent marking is needed, QR when scanning with mobile devices and directing to information matter, and the classic barcode for simple stock and shelf applications. If there is a customer or industry standard, it decides.
How much information should be written into the code?
Writing only the ID into the code is usually healthier; details are kept in the system. Embedding all data in the code makes the label invalid when information changes and lengthens reading times.

Barcode and DataMatrix in EFFIX MES

EFFIX MES provides label and DataMatrix generation as part of its own inventory and traceability module; lot, carrier and finished product IDs are printed from the system, so no unrecorded IDs are created. Scanned codes feed forward and backward tracing through lot traceability and product genealogy; material consumption tracking, WIP and FIFO run on the same IDs. On the HMI operator terminal, scan steps are part of the workflow; when the wrong lot is scanned, quarantine and lot blocking can kick in. Label reprints are recorded with their reason and kept in the hash-chained audit trail. For details, see the EFFIX MES page or request a demo.